Universal Tool & Engineering has just listed two re-manufactured Eaton Leonard VB300 CNC Tube Benders with BendPro Control for sale. UTE has re-manufactured and re-controlled both of these machines here in the shop and are both ready to ship today.

Please contact sales@universaltool.com or call us at 423-282-0304 for a formal quote, video links, or more pictures.

The models on sale with pricing and details are as follows:
VB300 (RH) – $98,750
VB300 (LH) – $139,900

VB300 (RH)
This Eaton Leonard VB300HP bending machine has been re-controlled and refurbished by Universal Tool & Engineering

Included in this re-control
BENDPRO G2V2 CONTROL AND SOFTWARE (1 Year Warranty on Control)
NEW YASKAWA SERVO MOTORS AND DRIVES
BECKOFF I/O
ABB SAFTEY CURCUITS
NEW WIRING INCLUDING, MOTOR STARTERS,RELAYS, AND CURCUITS BREAKERS
NEW TTP AIR COOLING SYSTEM
REBUILT MOOG SERVO VALVE
NEW HYDRALIC FILTERS
NEW LUBRICATION PUMP AND RESEVIOR
NEW PNUEMATIC REGULATOR AND FILTER
NEW C-AXIS ENCODER
3FT X 5FT SAFETY MAT
We can also provide tooling and part development as well as installation and training. Please let us know you needs. Everything on this bender is fully operational and in excellent working condition. We can load on your truck or we can provide a shipping quote.

VB300 (LH)
Eaton Leonard VB300 complete rebuild
1 year warranty
3 days install and training at your facility

ELECTRICAL:

Removed all existing electrical control components and wiring
Installed new digital oil temperature readout with alarms
Installed new main drive motor, coupling and spider
Installed all new electrical equipment enclosures
Installed all new wiring, flexible conduits, S.O. cords and related hardware
Installed new cable carrier and all wiring to Y and B axis
Installed new encoder for C axis (swing arm)
Installed new Y and B axis drive system (AC Servo Motors)
Installed all new machine sensors and wiring
Install new BendPro G2 control
Installed new safety mat system

MECHANICAL: (All tool mounting standard)

Completely stripped-down machine, sand blast and paint with one coat epoxy primer and one coat color
Rebuild swing arm shaft with all new mechanical components
Rebuild master collet assembly and install new thrust bearing on collet closer
Rebuild wiper die mounting if equipped
Rebuild mandrel base and adjustment nut
Installed new wear strips on swing away clamp, re-grind or replace clamp slide
Installed new wear strips on pressure die holder
Installed new wear strips on pressure die slide way, clean and lube then re-assemble and adjust
Installed new pins and bushings on swing arm
Installed new bearings on B axis spindle
Installed new swing arm bearings. Check and adjust preload on bearings
Installed new drive chain and mounting links, replace idlers and bearings on chain
Installed new slide way and bearings on carriage
Installed new machine lube pump, replace all lines, hoses, meter units and fittings

HYDRAULIC:

Rebuilt all old hydraulic components, lines, fittings, pumps and valves
Cleaned out reservoir, install new suction screens
Installed new hydraulic electric solenoid valves
Installed refurbished proportional valve for bend axis
Installed new pressure control gauges
Installed rebuilt pressure compensated main pump
Installed new hydraulic hoses
Installed new continuous hydraulic cooling and filtering system
Rebuild and repack all hydraulic cylinders

We can also provide tooling and part development. Please let us know your needs. Everything on this bender is fully operational and in excellent working condition. We can load on your truck or we can provide a shipping quote.